70
Switching the Second Output (AUX)
A
d
v
anc
ed
O
pera
tio
ns
Using Framing Mode
Framing mode will not function if an [Effect] is
configured.
1
In the [Input] list, tap the input source for which the
tracking function is enabled to display its video in the
[NEXT] viewer.
The [Camera] tab appears in the sub screen.
2
Tap the [Camera] tab to display the [Camera] screen,
and tap [Framing] to enable it.
Framing mode is enabled.
The mode cannot be changed while the camera is
moving. Wait for the camera to stop before tapping
[Framing].
3
Tap the target in the [NEXT] viewer.
The tapped position moves to the center position.
If you tap a target while the camera is moving, the
target will be disabled. In such cases, tap the target
again after the camera stops.
Switching the Second
Output (AUX)
In addition to PGM, another video composite output
(AUX) is available on this unit.
You can select the AUX output from the input sources
and the PGM. In addition, you can select “clean” versions
of the PGM output that exclude specific composite
images.
You can use this feature when you want to output two
different videos using two projectors, or when you want
to output a video without titles and logos alongside the
PGM output.
Usage example 1: Output separate videos via
two connected projectors
Usage example 2: Remove “LIVE” displays for
recording
If “LIVE” is displayed as [Logo1], output the video
without the “LIVE” display for the purposes of recording.
• PGM
• AUX
Tip
Tip
Tip
PGM
AUX
Summary of Contents for AWS-750
Page 121: ......
