Sony AWS-750 Operating Instructions Manual Download Page 103

Page: 103 / 121

103

Troubleshooting

ppen

dix

Troubleshooting

Messages

During operation of the unit, messages will appear when
problems occur. Read the messages, and follow their
instructions. If the problem persists, write down the
message number that is displayed, and contact your local
Sony representative.

The following types of message exist.

(Information):

Notifications

(Verification):

Messages that request verification

(Warning):

Warnings that indicate that continuing

an operation may result in error

(Error):

Warnings that indicate severe errors, such

as inability to continue operations and malfunctions

Icon Displays in Lists

This

warning mark appears if a problem exists with

materials in the [Scene] list or [Option] menu.
Check the status in the [Option] menu, and perform the
appropriate operation.

The “File Not Found” buttons in each list will be deleted
from the lists the next time the unit is started.

Problems and Solutions

Check the following before requesting repairs. If the problem persists, contact your local Sony representative.

Message type

Message number

Message

Tip

Symptom

Possible cause

Solution

The unit does not turn on or start
up properly.

An overcurrent is being supplied to
a USB-connected device.

Disconnect the USB-connected device. In addition,
disconnect the AC power cord of the AC adapter from
the power outlet temporarily.

For details, see “USB ports” (page 14).

Summary of Contents for AWS-750


























































































































Search results

Summary of Contents for AWS-750

Reviews:

Related manuals for AWS-750

Brands by name

Popular brands

Sony AWS-750, Operating Instructions Manual

Search results

Summary of Contents for AWS-750

Reviews:

Related manuals for AWS-750

Brands by name

Popular brands