Sony Anycast station AWS-G500, Operating Instructions Manual

Page: 209 / 316

209
Monitoring Audio
Chap
te
r 3
O
per
at
ion
s
In either case, when adjusting with the ACCESS menu, the output includes
these adjustments (excluding pan).
3
After selecting [Pre-Fader] or [Post-Fader] and confirming,
1
select [Send
Level], and confirm;
2
adjust the output level with the slider.
Press the ESC button, to close the ACCESS menu.
The AUX output connectors output the audio of mixing the left and right
audio channels.
Output from the MIX output connectors
1
Press the ACCESS button in the same column as the channel fader to which
the audio you want to be the MIX output is assigned.
2
In the top menu, select [MIX OUT] to set it [On], and confirm.
The setting turns on or off each time it is selected.
3
Press the ESC button to close the ACCESS menu.
Displaying the Audio Signal Output Destinations
Check where the output destinations are set.
1
Press the MENU button.
2
In the top menu, select [Audio Output].
3
Check the output destination display.
The display lights green when set to [On] in the audio signal output
destination settings (page 208).
Note
Caution
PGM OUT On
AUX1 OUT Off
AUX2 OUT Off
MIX OUT On
Off
Pre-Fader
Post-Fader
Send Level 0dB
1
2
AUX1 OUT Off
AUX2 OUT Off
MIX OUT On