Sony Anycast station AWS-G500, Operating Instructions Manual

Page: 179 / 316

179
Recording Video and Audio to an External Hard Disk
Chap
te
r 3
O
per
at
ion
s
Recorded settings and file details
Recorded settings
File details
Starting recording of material
1
Configure the settings in “Preparing for Recording to an External Hard Disk”
(page 174).
2
Select the source to be recorded in the NEXT selection buttons.
The inputs that can be recorded are only those to the interface module to
which the external hard disk is connected (inputs for which the source viewer
shows the hard disk number and recording status).
3
Hold down the REC button and press the PLAY button.
The source viewer device status shows “REC PAUSE.”
The following confirmation message also appears at the same time.
Video ACCESS menu settings (Adjustment is not possible for DV video)
Audio
ACCESS menu [Input Trim] setting (analog audio only)
Top menu [Audio MIC/LINE Level] setting
File name YYMMDD-(source number)–(3-digit suffix) (.avi)
File format DV format (.avi)
Signal format
(NTSC/PAL)
Same as the setting of [PGM OUT] of [Video Output] in the top menu.
Timecode DV material The timecode included with DV material is recorded.
Non DV material System timecode (page 54)
Caution
MENU
X-Y
REC
SHIFT
REC button
PLAY button