Sony a9 Instruction Manual Download Page 153

Page: 153 / 259

C:\d830100111\d830100111ILCE9UC2\01GB-ILCE9UC2\040MOV.indd
2019/02/19 10:01

ILCE-9
d-830-100-11 (1)

153

Shoo

ting movies

Marker Settings

Marker Display

Sets whether or not to display markers set using [

Marker Settings] on

the monitor or the viewfinder while shooting movies.

MENU



(Camera Settings 2)



[ Marker Display]



desired setting.

On: Markers are displayed. The markers are not recorded.
Off: No marker is displayed.

Note

• The markers are displayed when the mode dial is set to

(Movie) or

, or

when shooting movies.

• You cannot display markers when using [Focus Magnifier].

• The markers are displayed on the monitor or viewfinder. (You cannot output

the markers.)

Marker Settings

Sets the markers to be displayed while shooting movies.

MENU



(Camera Settings 2)



[ Marker Settings]



desired setting.

Center: Sets whether or not to display the center marker in the center of

the shooting screen.
[Off] / [On]

Aspect: Sets the aspect marker display.

[Off] / [4:3] / [13:9] / [14:9] / [15:9] / [1.66:1] / [1.85:1] / [2.35:1]

Safety Zone: Sets the safety zone display. This becomes the standard

range that can be received by a general household TV.
[Off] / [80%] / [90%]

Guideframe: Sets whether or not to display the guide frame. You can

verify whether the subject is level or perpendicular to the ground.
[Off] / [On]

Hint

• You can display several markers at the same time.

• Place the subject on the cross point of the [Guideframe] to make a balanced

composition.

Summary of Contents for a9




































































































































































































































































Search results

Summary of Contents for a9

Reviews:

Related manuals for a9

Brands by name

Popular brands

Sony a9, Instruction Manual

Search results

Summary of Contents for a9

Reviews:

Related manuals for a9

Brands by name

Popular brands