Sony A6500, Help Manual

Page: 282 / 585

Help Guide
Interchangeable Lens Digital Camera
ILCE-6500
α6500
Upload Settings (Eye-Fi)
Sets whether to use the upload function when using an Eye-Fi card (commercially available). This item appears when an
Eye-Fi card is inserted into the product’s memory card slot.
Menu item details
On:
Enables the upload function.
Off:
Disables the upload function.
Communication status screen display
: Standby. No images are to be sent.
: Upload standby
: Connecting
: Uploading
: Error
Note
Eye-Fi cards are only sold in certain countries/regions.
For more information on Eye-Fi cards, please contact the manufacturer or vendor directly.
Eye-Fi cards can be used only in the countries/regions where they were purchased. Use Eye-Fi cards in accordance with the law
of the countries/regions where you purchased the card.
Eye-Fi cards are equipped with a wireless LAN function. Do not insert an Eye-Fi card into the product in locations in which their
use is prohibited, such as on an airplane. When an Eye-Fi card is inserted into the product, set [Upload Settings] to [Off]. When
the upload function is set to [Off], the
indicator will be displayed on the product.
Power save mode will not function during uploading.
If (error) is displayed, remove the memory card and reinsert it, or turn the product off and then on again. If the indicator
appears again, the Eye-Fi card may be damaged.
Wireless LAN communication may be influenced by other communication devices. If the communication status is poor, move
closer to the access point to be connected.
Third parties may know where you shot the image if you upload the image when [ Loc. Info. Link Set.] → [Location Info. Link] is
set to [On]. To prevent third parties from obtaining your location information, set [ Loc. Info. Link Set.] → [Location Info. Link] to
[Off].
This product does not support Eye-Fi “Endless Memory Mode.” Before using an Eye-Fi card, be sure that “Endless Memory
Mode” is turned off.
When you use a new Eye-Fi card for the first time, copy the installation file on the Eye-Fi card to your computer before formatting
the Eye-Fi card.
MENU → (Setup) → [Upload Settings] → desired setting.
1
Set your Wi-Fi network or destination on the Eye-Fi card.
For details, refer to the manual supplied with the Eye-Fi card.
2
Insert the Eye-Fi card you have set up into the product, and shoot still images.
Images are transferred to your computer, etc., automatically via the Wi-Fi network.
3
282