Sony A6500, Help Manual

Page: 163 / 585

Help Guide
Interchangeable Lens Digital Camera
ILCE-6500
α6500
ISO
Sensitivity to light is expressed by the ISO number (recommended exposure index). The larger the number, the higher
the sensitivity.
Menu item details
Multi Frame NR:
Combines continuous shots to create an image with less noise. Press the right side to display the setting screen, then
select a desired value using the top/bottom sides of the control wheel.
Select the desired ISO number from ISO AUTO or ISO 100 – ISO 51200.
ISO AUTO:
Sets the ISO sensitivity automatically.
ISO 100 – ISO 51200:
Sets the ISO sensitivity manually. Selecting a larger number increases the ISO sensitivity.
Note
When [ Quality] is set to [RAW] or [RAW & JPEG], [Multi Frame NR] cannot be selected.
When [Multi Frame NR] is selected, the flash, [D-Range Opt.], or [Auto HDR] cannot be used.
When [Picture Profile] is set to other than [Off], [Multi Frame NR] cannot be selected.
When [Picture Effect] is set to other than [Off], [Multi Frame NR] cannot be selected.
[ISO AUTO] is selected when using the following functions:
[Intelligent Auto]
[Superior Auto]
[Scene Selection]
[Sweep Panorama]
The higher the ISO value, the more noise will appear on the images.
The available ISO settings will differ depending on whether you are shooting still images, shooting movies, or shooting slow-
motion/quick-motion movies.
When shooting movies, ISO values between 100 and 25600 are available. If the ISO value is set to a value larger than 25600,
the setting is automatically switched to 25600. When you finish recording the movie, the ISO value returns to the original setting.
When you use [Multi Frame NR], it takes some time for the product to perform the overlay processing of images.
When you select [ISO AUTO] with the shooting mode set to [P], [A], [S] or [M], the ISO sensitivity will be automatically adjusted
within the set range.
Hint
You can change the range of ISO sensitivity that is set automatically in [ISO AUTO] mode. Select [ISO AUTO] and press the right
side of the control wheel, and set the desired values for [ISO AUTO Maximum] and [ISO AUTO Minimum]. The values are also
applied when shooting in [ISO AUTO] mode under [Multi Frame NR].
You can set the effect level for noise reduction by selecting [NR Effect] under [Multi Frame NR].
ISO (ISO) on the control wheel → select desired setting.
You can also select MENU→ (Camera Settings1) → [ISO].
1
163