Sony a500 Instruction Manual Download Page 113

Page: 113 / 178

Us
ing the shooting

function

113

Capturing smiling faces (Smile Shutter)

When the camera detects a smile, the shutter is released automatically.

Smile Detection Sensitivity

You can set the sensitivity of the Smile Shutter function for detecting
smiles to one of the following three options:

(Slight Smile),

(Normal Smile), and

(Big Smile).

• To focus on the smile, overlay the Face Detection frame and AF area.
• Do not cover the eyes with bangs, etc. Keep the eyes narrowed.
• Do not obscure the face with a hat, a mask, sunglasses, etc.

Fn button

(Smile Shutter)

[On]

Select the

desired Smile Detection Sensitivity mode

• When the Smile Shutter is activated, the Smile Detection Sensitivity

indicator appears on the LCD monitor.

Wait detecting a smile.

The camera detects a smile and the focus
is confirmed. When the smile level
exceeds the

point on the indicator, the

camera records images automatically.
• When the camera detects faces, orange

Face Detection frames appear around
the faces. The Face Detection frames
turn green when these subjects come
into focus.

• The smile level of the face surrounded

by the double Face Detection frame is
indicated on the Smile Detection
Sensitivity indicator.

Smile Detection Sensitivity indicator

To stop shooting, Fn button

(Smile Shutter)

[Off]

Shooting techniques

Face Detection frame

Summary of Contents for a500



















































































































































































Search results

Summary of Contents for a500

Reviews:

Related manuals for a500

Brands by name

Popular brands

Sony a500, Instruction Manual

Search results

Summary of Contents for a500

Reviews:

Related manuals for a500

Brands by name

Popular brands