Sony A230 Instruction Manual Download Page 66

Page: 66 / 162

Notes

• The

(Camera shake warning) indicator is not indicated in manual exposure

mode.

• When the mode dial is set to M, the ISO setting [AUTO] is set to [100]. In M mode,

the ISO setting [AUTO] is not available. Set the ISO sensitivity as necessary
(page 82).

• Set the flash mode to (Fill-flash) when you shoot with the flash (page 75).

However, the flash range differs according to the aperture value. When you shoot
with the flash, check the flash range (page 77).

The EV scale in M mode

Shoot the image after the
exposure is set.

• : Images become brighter.

Toward –: Images become darker.

: Metered Manual

Exposure value

You can confirm the exposure value on
the EV scale on the Standard Display or
on the screen of the viewfinder.
The

arrow appears if the set exposure is

beyond the range of the EV scale. The arrow
starts flashing if the difference becomes
greater.

LCD monitor (Standard Display)

Standard value

Viewfinder

Standard value

Summary of Contents for A230



































































































































































Search results

Summary of Contents for A230

Reviews:

Related manuals for A230

Brands by name

Popular brands

Sony A230, Instruction Manual

Search results

Summary of Contents for A230

Reviews:

Related manuals for A230

Brands by name

Popular brands