Sony 4-166-309-11(1) Operating Instructions Manual Download Page 32

Page: 32 / 96

ICD-PX820

4-166-309-

(1)

E:\Voce-P\4166309111\4166309111ICDPX820CE7\01GB-ICDPX820CE7\050REC.fm

Master:

Left

Recording via Other Devices

Recording with an external
microphone

Connect an external microphone to the

(microphone) jack when the IC

recorder is in the stop mode.

When the recording mode is set to
“SHQ” or “HQ,” and a stereo
microphone is used, you can record
sound in stereo.

Press FOLDER/MENU to select the
folder in which you want to record
messages

(

, , , ,

or ).

Press

REC/PAUSE to start recording.

The built-in microphone is automatically
cut off.

If the input level is not strong enough,
adjust the microphone sensitivity on the
IC recorder.

When a plug in power type microphone
is connected, power is automatically
supplied to the microphone from the IC
recorder.

Press

(stop) to stop recording.

Recommended microphones

• Stereo microphone with shirt-clip is supplied

with some models in some regions only.
(The clip is detachable.)

• You can use the Sony ECM-CS10,

ECM-CZ10, ECM-DS70P, ECM-DS30P
electret condenser microphone (not
supplied).

Microphone

FOLDER/MENU

REC/PAUSE

(microphone) jack

Summary of Contents for 4-166-309-11(1)

































































































Search results

Summary of Contents for 4-166-309-11(1)

Reviews:

Related manuals for 4-166-309-11(1)

Brands by name

Popular brands

Sony 4-166-309-11(1), Operating Instructions Manual

Search results

Summary of Contents for 4-166-309-11(1)

Reviews:

Related manuals for 4-166-309-11(1)

Brands by name

Popular brands