Sony 4-157-878-12(1) Operating Manual Download

Page: 30 / 128

[100] appears on the screen when you
set the shutter speed to 1/100 second.
The larger the value on the screen, the
faster the shutter speed.

Press the SEL/PUSH EXEC dial

lock the shutter speed.
To readjust the shutter speed, do steps

Tips

• It is difficult to focus automatically at a lower

shutter speed. Manual focusing with your
camcorder attached to a tripod is recommended.

• When recording under fluorescent lamps,

sodium lamps, or mercury lamps, the picture
may flicker or change colors, or may have
horizontal bands of noise. You may be able to
improve the situation by adjusting the shutter
speed.

To adjust the shutter speed
automatically

Press the SHUTTER SPEED button

twice, or set the AUTO/MANUAL switch

to AUTO.

The shutter speed value disappears, or

appears next to the shutter speed value.

Notes

• When you set the AUTO/MANUAL switch

to AUTO, other manually adjusted items (iris,
gain, white balance) also become automatic.

You can record the subject clearly by using
the ND filter

when the recording

environment is too bright.
The ND filters 1, 2 and 3 reduce the volume
of light to about 1/4, 1/16 and 1/64,
respectively.

flashes during the iris automatic

adjustment, set the ND filter to 1. If

flashes during the iris automatic
adjustment, set the ND filter to 2. If

flashes during the iris automatic
adjustment, set the ND filter to 3.

The ND filter indicator will stop flashing
and remain on the screen.
If

flashes, set the ND filter to OFF.

The ND filter icon will disappear from the
screen.

Notes

• If you change the ND filters

during

recording, the movie and sound may be
distorted.

• When adjusting the iris manually, the ND filter

icon does not flash even if the light volume
should be adjusted with the ND filter.

• If the camcorder cannot detect the ND filter

position (OFF/1/2/3),

flashes on the screen.

Make sure that the ND filter is set correctly.

Tips

• While recording a bright subject, diffraction

may occur if you close the aperture further
down, resulting in a fuzzy focus (this is a
common phenomenon with video cameras). The
ND filter

suppresses this phenomenon and

gives better recording results.

You can adjust and fix the white balance
according to the lighting conditions of
recording environment.
You can store white balance values in

Adjusting the volume of light
(ND filter)

Adjusting to natural color (White
balance)

Changing the settings of your camcorder recordings (Continued)

Summary of Contents for 4-157-878-12(1)

































































































































Search results

Summary of Contents for 4-157-878-12(1)

Reviews:

Related manuals for 4-157-878-12(1)

Brands by name

Popular brands

Sony 4-157-878-12(1), Operating Manual

Search results

Summary of Contents for 4-157-878-12(1)

Reviews:

Related manuals for 4-157-878-12(1)

Brands by name

Popular brands