Us
ing the shooting
function
97
– A filter with an exposure factor, such as an ND filter, is used.
– A close-up lens is used.
• ADI flash is only available in combination with a lens that is provided with a
distance encoder. To determine if the lens is equipped with a distance encoder, refer
to the operating instructions supplied with the lens.
Fn button
t
(Metering
mode)
t
Select the desired mode
• Use
(Multi segment) metering for general shooting.
• When there is a high contrast subject in the AF area, measure the light of
the subject you want to shoot with the optimal exposure using the spot
metering function and take advantage of an AE lock shooting (page 92).
Note
• When the exposure mode is set to AUTO or Scene Selection, [Metering mode] is
fixed to
(Multi segment) and you cannot select other modes.
Selecting the method for measuring the brightness of a
subject (Metering mode)
(Multi segment)
This mode measures light on each area after dividing the total
area into multiple areas and determines the proper exposure
of the entire screen.
(Center weighted)
While emphasizing the central area of the screen, this mode
measures the average brightness of the entire screen.
(Spot)
This mode measures light only in the spot metering circle
located in the center area.
Shooting techniques
Summary of Contents for 4-149-235-11 (1)
Page 178: ...178 ...
