Sony 4-127-580-13(1) Operating Instructions Manual Download Page 95

Page: 95 / 136

ICD-SX700/SX800 4-127-580-11(1)

tili

zin

g Y

r Co

Connecting the IC recorder

to your computer

You can transfer the IC recorder data

onto your computer by connecting the

IC recorder to the computer.

Use the USB connecting cable supplied

with the IC recorder to connect the

(USB) connectors of the IC recorder

and your computer.

The IC recorder is recognized by

the computer as soon as the cable

is connected. You can connect or

disconnect the cable when the IC

recorder and the computer are turned

on or off.

While the IC recorder is connected to the

computer, “CONNECTING” is displayed in

the display window of the IC recorder.

Computer

Notes

Do not connect more than two USB devices

to your computer. Normal operation will not

be guaranteed.
Use of this IC recorder with a USB hub or a

USB extension cable is not guaranteed.
A malfunction may occur depending on the

USB devices connected at any one time.
Before connecting the IC recorder to the

computer, check that batteries are inserted

in the IC recorder.
It is recommended that you disconnect the

cable from the computer when you do not

use the Digital Voice Editor.





(USB)

connector

IC recorder

USB connecting cable

To USB

connector of

your computer

Summary of Contents for 4-127-580-13(1)









































































































































Search results

Summary of Contents for 4-127-580-13(1)

Reviews:

Related manuals for 4-127-580-13(1)

Brands by name

Popular brands

Sony 4-127-580-13(1), Operating Instructions Manual

Search results

Summary of Contents for 4-127-580-13(1)

Reviews:

Related manuals for 4-127-580-13(1)

Brands by name

Popular brands