Sony 4-127-580-13(1) Operating Instructions Manual Download Page 26

Page: 26 / 136

ICD-SX700/SX800 4-127-580-11(1)

Turning the power off

Slide the HOLD switch in the direction

of the arrow in the stop mode. “HOLD”

with the key mark and the current time is

displayed, then “POWER OFF” is displayed.

The IC recorder turns off within a few

seconds.

Turning the power on

Slide the HOLD switch in the opposite

direction from that of the arrow. The IC

recorder turnes on, and an accessing

animation is displayed.

Tips

When you are not going to use the IC

recorder for a long time, we recommend to

turn off the IC recorder.
When about 10 minutes have passed after

you have turned on the IC recorder and left

it without doing anything, the display goes

off automatically. (Press any button to show

the display.)





Summary of Contents for 4-127-580-13(1)









































































































































Search results

Summary of Contents for 4-127-580-13(1)

Reviews:

Related manuals for 4-127-580-13(1)

Brands by name

Popular brands

Sony 4-127-580-13(1), Operating Instructions Manual

Search results

Summary of Contents for 4-127-580-13(1)

Reviews:

Related manuals for 4-127-580-13(1)

Brands by name

Popular brands