Sony 4-127-580-13(1) Operating Instructions Manual Download Page 117

Page: 117 / 136

ICD-SX700/SX800 4-127-580-11(1)

Tro

tin

Digital Voice Editor

Refer to the Help files of the Digital Voice Editor software, too.

Symptom

Remedy

The Digital Voice Editor

software cannot be

installed.

The free disk or memory space on the computer is too small.

Check the hard disk and memory space.
You are trying to install the software into the operating system

that the Digital Voice Editor software does not support.
In Windows Vista® Ultimate/Windows Vista® Business/

Windows Vista® Home Premium/Windows Vista® Home

Basic/Windows® XP Media Center Edition 2005 Service Pack

2 or higher/Windows® XP Media Center Edition 2004 Service

Pack 2 or higher/Windows® XP Media Center Edition Service

Pack 2 or higher/Windows® XP Professional Service Pack 2 or

higher/Windows® XP Home Edition Service Pack 2 or higher,

you log on as a user name belonging to a user account with

limitations. Make sure to log on as a user name with the

“Computer administrator” user account.
In Windows® 2000 Professional, make sure to log on as the user

name of “Administrator. ”



The IC recorder or

“Memory Stick” cannot be

properly connected.

Check that the installation of the software has been successful.

Also check the connection as follows:

When using an external USB hub, connect the IC recorder directly

to the computer.

Disconnect and then connect the cable with the IC recorder.

Connect the IC recorder to another USB connector.

Your computer may be in the system standby/hibernate mode.

Do not let your computer enter into the system standby/

hibernate mode while being connected to the IC recorder.










Summary of Contents for 4-127-580-13(1)









































































































































Search results

Summary of Contents for 4-127-580-13(1)

Reviews:

Related manuals for 4-127-580-13(1)

Brands by name

Popular brands

Sony 4-127-580-13(1), Operating Instructions Manual

Search results

Summary of Contents for 4-127-580-13(1)

Reviews:

Related manuals for 4-127-580-13(1)

Brands by name

Popular brands