![background image](http://html.mh-extra.com/html/sony/3-300-703-11-2/3-300-703-11-2_operating-instructions-manual_420189049.webp)
49
GB
Ad
ditional Inf
o
rmation
Specifications
AUDIO POWER SPECIFICATION
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
USA model only
With 6-ohm loads, both channels driven,
from 120 Hz – 10 kHz; rates 90 watts per
channel minimum RMS power, with no
more than 0.7% total harmonic distortion
from 250 miliwatts to rated output.
Amplifier section
North American model only
The following are measured at
AC 120 V, 60 Hz
Front speaker
RMS output power (reference):
150 W + 150 W (per channel at 6
Ω
,
1 kHz, 10% THD)
Subwoofer
RMS output power (reference):
150 W (at 6
Ω
, 100 Hz, 10% THD)
Other models
The following are measured at
Mexican model:
AC 127 V, 60 Hz
Other models:
AC 120, 220, 230 – 240 V, 50/60 Hz
Front speaker
Power Output (rated):
90 W + 90 W (at 6
Ω
, 1 kHz, 1% THD)
RMS output power (reference):
150 W + 150 W (per channel at 6
Ω
,
1 kHz, 10% THD)
Subwoofer
RMS output power (reference):
150 W (at 6
Ω
, 100 Hz, 10% THD)
Inputs
LINE IN 1, 2 L/R:
Voltage 250 mV, impedance
47 kilohms
MIC:
Sensitivity 1 mV, impedance
10 kilohms
(USB) port:
Type A
Outputs
i
: accepts headphones of 8
Ω
or more
FRONT SPEAKER:
accepts impedance of 6
Ω
Disc player section
System
Compact disc and digital audio system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6
µ
W
* This output is the value measurement
at a distance of 200 mm from the
objective lens surface on the Optical
Pick-up Block with 7 mm aperture.
Frequency response
20 Hz – 20 kHz
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 88 dB
Continued
l
Summary of Contents for 3-300-703-11(2)
Page 55: ......