Sony 3-299-549-11(1) Operating Instructions Manual Download Page 85

Page: 85 / 127

Oth

r Op

eratio

You can select the way of displaying the soft-
touch buttons located on the top of the control
unit.

Press SYSTEM MENU.

Press

repeatedly until “ILLUM

MODE” appears in the front panel
display, then press

Press

to select a setting.

• “STANDARD”: sets the soft-touch

buttons lit up always.

• “SIMPLE”: sets the soft-touch buttons lit

up when you touch them. To operate the
soft-touch buttons, touch them once and
light them up. The soft-touch buttons turn
off if you do not touch them for about 10
seconds.

Press .

The setting is made.

Press SYSTEM MENU.

The system menu turns off.

Note

• When the soft-touch buttons turn off in “SIMPLE”

mode, first touch the soft-touch button area so that the
soft-touch buttons light up, then operate the system
with them.

Tip

• Even if “SIMPLE” mode is set, only

on the top of

the control unit lights up during playback.

Changing the Display
Appearance of the Soft-
touch Buttons

(ILLUMINATION MODE)

SYSTEM
ME

X/x/c

Soft-touch button area

Summary of Contents for 3-299-549-11(1)
































































































































Search results

Summary of Contents for 3-299-549-11(1)

Reviews:

Related manuals for 3-299-549-11(1)

Brands by name

Popular brands

Sony 3-299-549-11(1), Operating Instructions Manual

Search results

Summary of Contents for 3-299-549-11(1)

Reviews:

Related manuals for 3-299-549-11(1)

Brands by name

Popular brands