Sony 3-295-946-12(1) Operating Instructions Manual Download

Page: 21 / 72

Getting Star

ted

4: Connecting the antennas

Connect the supplied AM loop antenna and
FM wire antenna.
Before connecting the antennas, make sure to
disconnect the AC power cord (mains lead).

* The shape of the connector varies depending on

the area code of this receiver.

Notes

• To prevent noise pickup, keep the AM loop

antenna away from the receiver and other
components.

• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as

horizontal as possible.

OPT IN

VIDEO 2

COAX IN

AUDIO IN

DVD

DVD IN

SAT IN

BD IN

OUT

ANTENNA

SA-CD/CD

AUDIO IN

VIDEO 1

HDMI

DMPO

DIGITAL

DC5V 700mA MAX

FM wire antenna (supplied)

AM loop antenna (supplied)

Summary of Contents for 3-295-946-12(1)









































































Search results

Summary of Contents for 3-295-946-12(1)

Reviews:

Related manuals for 3-295-946-12(1)

Brands by name

Popular brands

Sony 3-295-946-12(1), Operating Instructions Manual

Search results

Summary of Contents for 3-295-946-12(1)

Reviews:

Related manuals for 3-295-946-12(1)

Brands by name

Popular brands