24
GB
Using optional audio
components
1
Connect an optional audio
component to the unit.
LBT-ZT4 only:
Connect to the AUDIO INPUT jack on
the unit using a stereo mini-plug cord
(not supplied).
Other models:
Connect to the AUDIO INPUT L/R
jacks on the unit using an audio cord
(not supplied).
2
Turn down the volume.
Press VOLUME – (or turn MASTER
VOLUME on the unit counter
clockwise).
3
Select the AUDIO function.
Press FUNCTION (RM-AMU006) or
FU/– (RM-AMU008)
repeatedly (or press AUDIO on the
unit).
4
Start playing the connected
component.
5
Adjust the volume.
Press /– (or turn
MASTER VOLUME on the unit).
Using the DIGITAL
MEDIA PORT adapter
(LBT-ZT4 only)
1
Select the DMPORT function.
Press FU/– repeatedly
(or press DMPORT on the unit).
2
Start playing the component
connected to the DIGITAL
MEDIA PORT adapter.
The sound from the connected
component is played on the system.
For operation details, refer to the
operating instructions of the DIGITAL
MEDIA PORT adapter.
Notes
• Depending on the type of DIGITAL MEDIA
PORT adapter, you may be able to operate the
connected component using the buttons on the
remote or the unit.
• You can use the system to charge the battery
of the audio device connected to the
DIGITAL MEDIA PORT adapter while the
system is turned on.
