Sony 3-283-040-11(1) Operating Instructions Manual Download Page 9

Page: 9 / 116

Ge
tting Star

Inserting batteries into the remote

Insert two R6 (size AA) batteries (supplied) by matching the

and

ends on the batteries to the

markings inside the compartment. To use the remote, point it at the remote sensor

on the unit.

Note

• Do not leave the remote in an extremely hot or humid place.

• Do not use a new battery with an old one.

• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.

• Do not expose the remote sensor to direct sunlight or lighting apparatus. Doing so may cause a malfunction.

• If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage

from battery leakage and corrosion.

Attaching the foot pads to the subwoofer

Attach the foot pads (supplied) to the bottom of the subwoofer to stabilize the subwoofer and prevent
it from slipping.

Remove the foot pads from
the mount seat.

Summary of Contents for 3-283-040-11(1)





















































































































Search results

Summary of Contents for 3-283-040-11(1)

Reviews:

Related manuals for 3-283-040-11(1)

Brands by name

Popular brands

Sony 3-283-040-11(1), Operating Instructions Manual

Search results

Summary of Contents for 3-283-040-11(1)

Reviews:

Related manuals for 3-283-040-11(1)

Brands by name

Popular brands