Sony 3-283-040-11(1) Operating Instructions Manual Download

Page: 32 / 116

Selecting the Sound
Mode

You can select a suitable sound mode for movies
or music.

Press SOUND MODE repeatedly during
playback until the desired mode appears in
the front panel display.

• “AUTO”: The system selects “MOVIE” or

“MUSIC” automatically to produce the sound
effect depending on the disc.

• “MOVIE”: The system provides the sound for

movies.

• “MUSIC”: The system provides the sound for

music.

Note

• You cannot operate these setup items when you

connect headphones to the unit or surround amplifier.

• When changing the sound mode while using the

S-AIR receiver, sound from the S-AIR receiver may
skip.

Enjoying Multiplex
Broadcast Sound

(DUAL MONO)

You can enjoy multiplex broadcast sound when
the system receives or plays the Dolby Digital
multiplex broadcast signal.

Note

• To receive the Dolby Digital signal, you need to

connect a TV or other component to the unit with an
optical or coaxial digital cord (page 20) and set the
digital output mode of the TV or other component to
Dolby Digital.

Press AUDIO repeatedly until the desired
signal appears in the front panel display.

• “MAIN”: Sound of the main language will be

output.

• “SUB”: Sound of the sub language will be

output.

• “MAIN+SUB”: Mixed sound of both the main

and sub languages will be output.

SOUND
MODE

AUDIO

Summary of Contents for 3-283-040-11(1)





















































































































Search results

Summary of Contents for 3-283-040-11(1)

Reviews:

Related manuals for 3-283-040-11(1)

Brands by name

Popular brands

Sony 3-283-040-11(1), Operating Instructions Manual

Search results

Summary of Contents for 3-283-040-11(1)

Reviews:

Related manuals for 3-283-040-11(1)

Brands by name

Popular brands