Sony 3-280-847-11(1) Operating Manual Download

Page: 27 / 146

ay
bac

Changing the settings of your camcorder
recordings

Set the ZOOM switch

to SERVO.

Move the power zoom lever

slightly for

a slower zoom. Move it further for a faster
zoom.

Tips

• The minimum distance required between your

camcorder and the subject for focus is about 1
cm (about 13/32 in.) for wide angle and about
80 cm (about 2 5/8 feet) for telephoto.

• The focus may not be adjusted at certain zoom

positions if the subject is within 80 cm (about 2
5/8 feet) from your camcorder.

• When you set [FOCUS MACRO] to [OFF] or

the focus ring to the mode A position (p. 28),
you cannot focus on a subject within 80 cm
(about 2 5/8 feet) regardless of the zoom
position (p. 72).

• Be sure to keep your finger on the power zoom

lever

. If you move your finger off the power

zoom lever

, the operation sound of the

power zoom lever

may also be recorded.

Set the ZOOM switch

to SERVO.

Set the handle zoom switch

to VAR

or FIX.

Tips

• When you set the handle zoom switch

VAR, you can zoom in or out at variable
speed.

• When you set the handle zoom switch

FIX, you can zoom in or out at fixed speed
set in [HANDLE ZOOM] (p. 72).

Press the handle zoom lever

to zoom

in or out.

Notes

• You cannot use the handle zoom lever

when

the handle zoom switch

is set to OFF.

• You cannot change the zoom speed of the zoom

lever

with the handle zoom switch

You can zoom at the desired speed by
turning the zoom ring

. Fine adjustment

is also possible.

Set the ZOOM switch

to MANUAL.

Turn the zoom ring

to zoom in or

out.

Tips

• You can remove the zoom pin.

Adjusting the zoom

Using the zoom lever

Close view:

(Telephoto)

Wide view:

(Wide angle)

Using the handle zoom

Using the zoom ring

Continued

Summary of Contents for 3-280-847-11(1)



















































































































































Search results

Summary of Contents for 3-280-847-11(1)

Reviews:

Related manuals for 3-280-847-11(1)

Brands by name

Popular brands

Sony 3-280-847-11(1), Operating Manual

Search results

Summary of Contents for 3-280-847-11(1)

Reviews:

Related manuals for 3-280-847-11(1)

Brands by name

Popular brands