Sony 3-280-847-11(1) Operating Manual Download

Page: 13 / 146

Ge
tt

rte

pressing the PUSH (lens hood release)
button.

Tips

• If you attach or remove a 72mm (2 7/8 in.) PL

filter or MC protector, remove the lens hood
with lens cover.

To open or close the shutter of the
Lens hood with lens cover

Move the lens cover lever up or down to
open or close the lens cover.

Make sure that the HDV/DV jack cover is
closed.
Attach the Memory Recording Unit to your
camcorder as illustrated.
For details, refer to the Operating
Instructions of the Memory Recording Unit
on the CD-ROM.

Notes

• You cannot use the

HDV/DV jack when the

Memory Recording Unit is attached to your
camcorder.

To remove the Memory Recording
Unit

Slide the unit upward while pushing the
RELEASE lever of the Memory Recording
Unit downward.

To attach the Memory Recording Unit
to the i.LINK Cradle

Attach the Memory Recording Unit to the
i.LINK Cradle as illustrated.

To remove the Memory Recording
Unit from the i.LINK Cradle

Slide the unit upward while pushing the
RELEASE lever of the Memory Recording
Unit downward.

Tips

• Refer to the operating instructions of HVR-

MRC1 on the supplied CD-ROM for details on
the i.LINK cradle.

Attaching Memory Recording Unit

Move the lens cover lever to OPEN to
open the lens cover, and move the lever to
CLOSE to close the lens cover.

HDV/DV jack (6-pin)

Summary of Contents for 3-280-847-11(1)



















































































































































Search results

Summary of Contents for 3-280-847-11(1)

Reviews:

Related manuals for 3-280-847-11(1)

Brands by name

Popular brands

Sony 3-280-847-11(1), Operating Manual

Search results

Summary of Contents for 3-280-847-11(1)

Reviews:

Related manuals for 3-280-847-11(1)

Brands by name

Popular brands