Sony 3-280-847-11(1) Operating Manual Download

Page: 12 / 146

Attach the wind screen

to the

supplied microphone

Place the microphone

in the

microphone holder

with the

model name facing upward, close
the cover, and shut the clamp.

Connect the plug of the
microphone to the INPUT1 jack

Put the microphone cable into the
cable holder

Select the channel with the REC
CH SELECT switch

The channel to be used differs
depending on the relationship between
the REC CH SELECT switch positions
and the input jacks.
See the table below.

Tips

• See page 41 for adjusting the volume.
• Set the INPUT1/INPUT2 switch to MIC+48V

when you use the supplied microphone.

Align the marks on the lens hood to
those on the camcorder, and turn the
lens hood in the direction of the
arrow

To remove the Lens hood with lens
cover

Turn the lens hood in the opposite direction
to the arrow

in the illustration while

Attaching the supplied
microphone

LINE

INPUT2 INPUT1

MIC

LINE

MIC

INPUT2

INPUT1

REC CH SELECT
switch position

Input jack

Channel to
be used

CH1, CH2

INPUT1

Channel1
Channel2

INPUT2

CH1

INPUT1

Channel1

INPUT2

Channel2

Attaching the lens hood with lens
cover

PUSH (lens hood release) button

Step 2: Attaching the supplied items (Continued)

Summary of Contents for 3-280-847-11(1)



















































































































































Search results

Summary of Contents for 3-280-847-11(1)

Reviews:

Related manuals for 3-280-847-11(1)

Brands by name

Popular brands

Sony 3-280-847-11(1), Operating Manual

Search results

Summary of Contents for 3-280-847-11(1)

Reviews:

Related manuals for 3-280-847-11(1)

Brands by name

Popular brands