Sony 1070 Handbook Download Page 114

Page: 114 / 132

114

(Warning indicator pertaining to

camera-shake warning)*

• The amount of lights is not sufficient, so

camera-shake easily occurs. Use the
flash.

• The camcorder is unsteady, so camera-

shake easily occurs. Hold the camcorder
steady with both hands and record the
image. However, note that the camera-
shake warning indicator does not
disappear.

You hear a melody when the warning indicators
appear on the screen (p.63).

If messages appear on the screen, follow the
instructions.

Battery

Use the “InfoLITHIUM” battery pack.

(p.120)

Battery level is low.

(p.17, 120)

Old Battery. Use a new one.

(p.120)

Hard disk

Drive error. Turn on power again.

• A problem occurred with the hard disk.

Turn off and then on again.

Overheated. Cannot access HDD.

Low temperature. Cannot access

HDD.

HDD full. Cannot record.

• Delete unnecessary images (p.45).

Movie scene number is full.

Cannot record.

• Delete unnecessary images (p.45).

Movie folder full. Cannot record

movies.

• Delete unnecessary images (p.45) or

perform [HDD FORMAT].

Still scene number is full. Cannot

record.

• Delete unnecessary images (p.45).

Still pic folder full. Cannot record

stills.

• Delete unnecessary images (p.45) or

perform [HDD FORMAT].

Movie recording disabled.

• Movies cannot be recorded due to some

limitations of the hard disk of the
camcorder. However, you may be able to
record still images.

Still recording disabled.

• Still images cannot be recorded due to

some limitations of the hard disk of the
camcorder. However, you may be able to
record movies.

No applicable files available.

• Image files have been deleted.

Format error. Please format.

• The hard disk of the camcorder is set

differently from the default format.
Performing [HDD FORMAT] (p.58)
may enable you to use your camcorder.

Data error.

• An error occurred during reading or

writing the hard disk of the camcorder.
This may occur when you keep applying
shock on the camcorder.

Access error.

• An error occurred during reading or

writing the hard disk of the camcorder.
This may occur when you keep applying
shock on the camcorder.

Description of warning
messages

Summary of Contents for 1070





































































































































Search results

Summary of Contents for 1070

Reviews:

Related manuals for 1070

Brands by name

Popular brands

Sony 1070, Handbook

Search results

Summary of Contents for 1070

Reviews:

Related manuals for 1070

Brands by name

Popular brands