Installation Instruction
,
Mechanical
1/00021-1/FEA 209 544/601 B
©
Sony Ericsson Mobile Communications AB
3(5)
2.2 Computer
IBM compatible computer is required. The computer should include at least two USB-
ports. Refer to Equipment List for minimum requirements.
2.3 Service Card Reader/Service Card
NOTE!
The Service Card is only needed for printing labels and when flashing
offline
The Service Card Reader is delivered with the necessary software and instructions for
installation. The Service Card Reader should be connected to an USB-port on the
computer. The Service Card should be inserted into the Service Card Reader.
Smart Card Reader Service Card
2.4 Sony Ericsson programming interface cable – DCU-60
The cable is the interface between the computer and the phone. DCU-60 cable should
be connected to an USB-port on the computer.
2.5 Infrared Device
An RS 232 or USB type infrared adapter or another phone may be used.
Install according to the manufacturer’s instructions.
2.6 Bluetooth Device
Any Bluetooth device as headset, other Bluetooth phone or other Bluetooth device can
be used to verify the Bluetooth function in the phone. Set up the connection according to
the chosen equipments manufacturer instructions.
