Sony Ericsson W700i, User Manual

Page: 81 / 103

This is the Internet version of the user's guide. © Print only for private use.
81 Troubleshooting
To add a new code
1
}
Organizer
}
Code Memo and enter
your passcode
}
New Code
}
Add .
2 Enter a name associated with the
code,
}
Continue .
3 Enter the code
}
Done .
To change the passcode
1 Open code memo as described above
}
More
}
Change Passcode .
2 Enter your new passcode
}
Continue .
3 Re-enter the new passcode
}
Continue .
4 Enter a checkword
}
Done .
Forgot your passcode?
If you forget your passcode,
you must reset the code memo.
To reset code memo
1
}
More
}
Reset .
2 Reset code memo? is displayed
}
Yes . The code memo is reset and all
entries are cleared. The next time you
enter the code memo, you must start
by opening the code memo for the
first time.
Troubleshooting
Why doesn’t the phone work the way
I want?
This chapter lists some problems that
you might encounter while using your
phone. Some problems require you to
call your service provider, but you can
easily correct most of the problems
yourself.
However, if you need to hand in
your phone for repair, please note that
you may lose information and content
that you have saved in your phone.
You are advised to make a copy of
such information before handing your
phone in for repair.
For more support go to
www.sonyericsson.com/support.
I have problems with memory
capacity or the phone working slowly
Possible cause : The phone memory
is full or the memory contents are not
properly organized.
Solution : Restart your phone every
day to free memory and increase
the capacity of your phone.