Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
24(128)
3
Flip
3.1
Flip Disassembly
The disassembly of the flip portion of this product is broken down into sections by the
components that need to be removed to perform the disassembly. The sections that make up the
“Flip Disassembly” procedure are arranged in the order that they must be performed to properly
disassemble the flip portion. If your task is to replace one of the components that are removed
during the flip disassembly, just perform the sections of the flip disassembly through to the point
that the part you are trying to replace is removed.
3.1.1
Inner Base Cover Removal
•
Perform the sections 2.1.1 – 2.1.3 of the Base Disassembly before proceeding.
Tools needed:
•
Torque screwdriver
•
JCIS No. 0 bit
*
Style 2A ESD tweezers (Blunt tip)
Step-by-Step Instructions
NOTE! Be careful when handling the inner base
cover. The spring finger portion of the
Bluetooth antenna can easily become
damaged.
1.
Rotate the inner base cover so that the phone is in the
closed position as shown.
2.
Remove the four screws that mount the inner base
cover to the hinge assembly using a torque
screwdriver and a JCIS No. 0 bit.
NOTE! Do not reuse these screws.
3.
Lift the hinge braces from the inner base cover and set
them aside.
