Sony Ericsson T230c, User Manual

Page: 44 / 80

This is the Internet version of the user's guide. © Print only for private use.
44 Setting up Mobile Internet
• IP address – WAP gateway server address.
• Advanced – More profile settings, see below.
• Delete – Remove the profile.
If you select Advanced you can also do the following:
• Chg. homepage – Enter the address of the WAP site
you want as the homepage.
• Second account – Select an alternative data account,
if the first in Connect using fails.
• User id – Enter your user id for the WAP gateway.
• Password – Enter your password for the WAP
gateway.
• Security – Ensure the security of your WAP
connection.
• Show pictures – View pictures while browsing.
E-mail account settings
An e-mail account specifies, for example, the server
that is used for your e-mail messages.
To create an e-mail account
1. Scroll to Messages ,
YES
, E-mail ,
YES
, Options ,
YES
.
2. Select Edit account ,
YES
.
3. Select Add new? ,
YES
.
4. Enter a name for the account, for example Home
or Office .
5. Select Connect using ,
YES
.
A list appears with the data accounts that you have
saved in your phone.
6. Select the data account you want to use with this
e-mail account,
YES
.
7. Enter the rest of the settings in the list, some of which
are optional. To enter the settings, scroll to the setting,
press
YES
and enter the information. Press
YES
to
confirm. Repeat this for each required setting. You use
the same e-mail settings in your phone as in your PC
e-mail program. If you do not have an e-mail service,
contact your operator to get all the necessary settings.
• Protocol – select POP3 or IMAP4 .
• Inc. server (Incoming server)– enter the name or IP
address of the service provider for incoming e-mail
messages. For example, mail.server.com or 10.1.1.1.
• Incoming port – if needed, change the number of the
port used by the protocol you are using.
• Mailbox – enter a user name for your e-mail account.
• Password – enter a password for your e-mail account.
Your service provider may alternatively request a
password on connection.