168
Control panel
This is the Internet version of the user’s guide. © Print only for private use.
Tip
Dialogue details when using secure access are vendor,
system and network specific. You should contact the
administrator of the network you wish to access to get the
correct information.
WAP accounts
Use these settings to set up and manage WAP accounts
(sometimes called WAP profiles) on your P800.
WAP accounts are intended for multimedia message and for
accessing the Internet through a WAP gateway. (Such gateways
make use of proxy port 9200-9203.) All other proxy settings
should be included in your Internet accounts.
For security reasons, some WAP pages and services, for
example online banking, can only be accessed from a particular
WAP account.
The dialogue has two tabs:
Basic
and
Preferred.
Basic tab
The dialogue shows a list of all the WAP accounts on your P800.
You can add a
New
account to the list and
Edit
or
Delete
an
existing account.
Note
You access WAP pages through an Internet Service
Provider (ISP) so, when you create a WAP account, you must
choose one of your existing Internet accounts or first create a
new one.
To create a new WAP account:
1. Enter the name of the WAP account.
2. Select the Internet account you want to use.
Preferred
indicates the account set as preferred in the internet setup.
3. If you are going to use a WAP gateway or a proxy, select the
Use proxy
check box.
4. Enter the (IP)
Address
of the gateway or proxy.
5. Enter the
Port
address of the gateway or proxy.
For a WAP gateway use:
– 9201 for a normal connection.
– 9203 for an encrypted secure connection.
•
If the gateway/proxy requires
User name
and
Password
, which
is very unusual, fill in the last two fields in the dialogue.
Preferred tab
Select the check box to set a preferred WAP account. It will be
used when you use the
Open page
command in the
Internet
application and when a page is opened from another P800
application.
