Synchronization and backup
143
This is the Internet version of the user’s guide. © Print only for private use.
Note
Backup and restore does not work via infrared or
Bluetooth wireless technology.
Performing a backup
To make a backup
1. Turn on your P800 and connect it to the PC via cable.
2. In the PC, click on
on the PC taskbar and select
Back up
and restore
.
3. Select your P800 in the menu that appears. Several P800 can
be backed up to the same PC.
4. Select
Backup
and choose what to back up: P800 and/or
Memory Stick.
5. Click
Yes
and follow the instructions in the PC and in the
P800.
6. The backup is complete.
Restoring data
Lost data or accidentally deleted information in your P800 can
you restore from an earlier backup. A backup from the phone
can only be restored to the phone, and a back up from a Memory
Stick only to a Memory Stick.
To restore a backup
1. Turn on your P800 and connect it to the PC via cable.
2. In the PC, click on
on the PC taskbar and select
Back up
and restore
.
3. Select your P800 in the menu that appears. Several P800 can
be backed up to the same PC.
4. Select one of the backups in the list of previously saved
backups and click
Restore
.
5. Click
Yes
and follow the instructions in the PC and in the
P800.
6. The restore is complete.
Note
Everything in your P800 will be overwritten by the chosen
backup. Once you have clicked Yes to start the restore, you
cannot cancel the procedure.
Note
If you have used your Secure Tokens (Secure Access files)
since you made your backup, you must reconfigure these. If you
restore another P800, you must reconfigure your Secure Tokens.
For more information see “Secure tokens” on page 167.