To charge the phone
1
Plug the phone charger into a power outlet.
2
Plug one end of the USB cable into the charger (or into the USB port of a computer).
3
Plug the other end of the cable into the micro USB port on your phone, with the USB
symbol facing up.
4
When the phone is fully charged, disconnect the USB cable from your phone by
pulling it straight outwards.
Make sure not to bend the connector when removing the cable from the phone.
Using the touch screen
A protective plastic sheet is attached to the screen of your phone when you buy it. You
need to peel off this sheet before using the touch screen. Otherwise, the touch screen might
not function properly.
When your phone is on and left idle for a set period of time, the screen darkens to save
battery power, and locks automatically. This lock prevents unwanted actions on the touch
screen when you are not using it. You can also set personal locks to protect your
subscription and make sure only you can access your phone content.
Your phone screen is made from glass. Do not touch the screen if the glass is cracked or
shattered. Avoid trying to repair a damaged screen yourself. Glass screens are sensitive to drops
and mechanical shocks. Cases of negligent care are not covered by the Sony Ericsson warranty
service.
To open or highlight an item
•
Tap the item.
To mark or unmark options
•
Tap the relevant checkbox, or in some cases the right side of the list option, to mark
or unmark an option.
Marked checkbox
Unmarked checkbox
Marked list option
Unmarked list option
14
This is an Internet version of this publication. © Print only for private use.