69
More features
To add a code
1
From standby select
2
Enter a passcode and select
3
Scroll to
and select
4
Enter a name associated with the
code and select
5
.
To change a passcode
1
From standby select
2
Enter your passcode and select
3
Enter your new passcode and select
4
Re-enter the new passcode and select
5
Enter a checkword and select
Forget your passcode?
If you forget your passcode, you must
reset the code memo. This means that
all entries in the code memo are deleted.
The next time you enter the code
memo, you must proceed as if you are
opening it for the first time. See
open code memo for the first time
on page 68.
To reset code memo
1
From standby select
>
.
2
Enter any passcode to access the
code memo. The checkword and
codes that are then shown are incorrect.
3
Select
4
5
Select
.
Profiles
Profiles automatically adapt some
phone settings to different situations,
for example, the ring volume may be
adapted to suit a meeting or an
accessory. You can reset all profiles
to how they were set when you
purchased your phone.
To select a profile
1
From standby select
>
> the
2
Select a profile.
To view and edit a profile
1
From standby select
>
> the
2
Scroll to a profile and select
>
.
You cannot rename the Normal profile.
This is the Internet version of the User's guide. © Print only for private use.
