13
Entering letters and characters
When writing messages and notes there are two ways to enter
letters and characters:
• Multitap text input
• T9™ Text Input
To enter letters using multitap input
• Press
-
until the desired character appears on the
screen.
• Press
to shift between capital and lower-case letters.
• Press and hold
-
to enter numbers.
• Press
to delete letters and numbers.
• Press
for the most common punctuation marks.
• Press
to add a space.
T9™ Text Input
The T9™ Text Input method uses a built-in dictionary to
recognize the most commonly used word for each sequence
of key presses. This way, you press each key only once,
even if the letter you want is not the first letter on the key.
To enter letters using T9 Text Input
1
For example, if you want to write the word “Jane”,
press , , , .
2
If the word shown is the one you want, press
to accept
and add a space. To accept a word without adding a space,
press
. If the word shown is not the one you want, press
or
repeatedly to view alternative words. Accept
a word and add a space by pressing
.
3
Continue writing your message. To enter a full stop or
other punctuation marks, press
and then
or
repeatedly. Accept by pressing
.
This is the Internet version of the user’s guide © Print only for private use.
