No
t fo
r C
om
me
rci
al U
se
Using the car handsfree
11
To transfer the sound to the phone
• During a call, scroll to
YES
,
YES
,
YES
). You hear a short high tone
when the sound has been transferred.
• Or, with some phones, press
on the car handsfree
until you hear a tone.
Using headset and car handsfree
When you enter the car after using the
Bluetooth
headset, the car handsfree and phone usually connect
automatically the moment you turn the ignition key to
on. The phone connects to the device which is first in
the list of paired devices. If the indicator lights of the
car handsfree are off, move the car handsfree to first
position of the list of paired devices in your phone.
To move the car handsfree to first position
1.
Scroll to
or
,
YES
,
YES
,
YES
.
2.
Select the car handsfree,
YES
,
YES
.
With some phones, you can also select
YES
.
You then connect to the car handsfree without
changing the order of the devices in the list of paired
devices.
Note:
If you have an ongoing call in your Bluetooth
headset, and enter the car and wish to continue your
conversation in the car handsfree, you must transfer
the sound to the car handsfree. See “To transfer the
sound to the car handsfree” on page 10.
Switching between phones
You can pair the
Bluetooth
car handsfree with up to
five mobile phones, but you can only use one phone at
a time with the car handsfree. If you want to use one
of the other phones that you have paired with your car
handsfree, you need to enter pairing mode and select
the car handsfree again.
To switch between phones
1.
If the indicator light is green or red, the car handsfree
is connected to a
Bluetooth
device. To disconnect
the devices, press
until you hear a tone.
The indicator light is turned off.
2.
Press and hold
and
at the same time until
you hear a long high tone and the indicator lights on
the control panel flash green and red.
Summary of Contents for HCB-30
Page 2: ...Not for Commercial Use ...
Page 32: ...Not for Commercial Use 32 ...
Page 80: ...Not for Commercial Use 80 ...
