Operating Manual | 4 Preparing a work order
SONO-PR 200
33 / 47
Revision: 2.0 | 2022-10-14
4.6
Setting the transmitter pulse type
Description
Before connecting a probe, a suitable transmitter pulse type must be set.
CAUTION
Destruction of probes due to transmitter pulses with wrong polarity!
The use of transmitter pulses with the wrong polarity may lead to destruction of probes.
•
Before setting the transmitter pulse, always check the manufacturer's instructions
for the particular probe.
•
Before connecting a probe, always set the suitable transmitter pulse type.
Procedure
1.
Tap the
Impulse
button on the “Main menu” screen.
The “Settings” screen opens.
2.
Set the particular transmitter pulse type with the left/right buttons of the directional
pad.
