SonoSite iLook, User Manual

Page: 43 / 102

Chapter 4: Accessories
35
Ac
ce
ss
o
ri
e
s
To insert the system into the stand:
1
Insert the system into the stand sleeve, sliding the system brace over the black guide. See
Figure 3 .
2
Pull the locking lever forward to secure.
3
Insert the transducer into the transducer holder.
To remove the system from the stand:
1
Release the locking lever.
2
Carefully remove the system by lifting it out of the sleeve.
3
Remove the transducer.
To adjust the viewing angle:
1
Hold the bottom of the sleeve with one hand and turn angle adjustment knob counterclockwise
to loosen.
2
Adjust to desired angle.
3
Turn lever clockwise to tighten.
To adjust the height of the stand:
1
Turn the height adjustment knob counterclockwise and raise or lower to desired height.
2
Turn height adjustment knob clockwise to lock in place.