SonoSite Basic Stand, User Manual, Page: 9 / 94

En
glish
De
utsch
Español
Fr
a
n
ça
is
It
a
lia
n
o
Po
rt
u
g
u
ê
s
Assemble Basic Stand 5
Adjusting Basket
Adjust the basket low enough to allow room for the printer bracket above it.
Adjust Basket
1 Loosen the two screws on the two brackets using a #1 Phillips screwdriver.
2 Rotate the basket 90 degrees to the left as viewed from the front of the stand.
3 Position the basket approximately 8 inches (20 cm) below the system sleeve.
4 Tighten the two screws on the two brackets to secure the basket to the column.
Column
Basket
Brackets with
screws (2)