USB OUT R
USB output, right channel (2)
NOTE
When setting either channel pair (1 & 2 or 3 & 4) to DISABLED, the
corresponding meter does not appear on the main screen.
Reference Level
The reference level value is a vertical mark on the main screen meters. Its range is -
30 to 0 dBFS. When set to 0dBFS, the reference level mark is not visible. Factory
default is -18 dBFS.
Hold Time
Each meter is displayed
as a vertical bar with the highest peak value measured from a
defined hold time with a range of 0 to 30 seconds. When set to 0, the hold time bar
never appears. Factory default is 3 seconds.
4.15 Controls Menu
The Controls menu contains
all user interface related configuration.
Selected parameter name
Left rotary
encoder event
Right encoder long push event
Right rotary encoder event
Left encoder
long push event
Menu navigation left/right
The upper text displays the selected parameter name. There are 5 parameters in this
menu:
•
Left rotary encoder event (LEFT ROT ENC). This defines what happens when
the user rotates the left rotary encoder in the main menu.
•
Right rotary encoder event (RIGHT ROT ENC). This defines what happens
when the user rotates the left rotary encoder in the main menu.
•
Menu navigation left/right (MENU NAV)
•
Encoder long push event (LEFT LONG PUSH). This defines what happens
when the user long-press the left encoder in the main menu.
•
Encoder long push event (RIGHT LONG PUSH). This defines what happens
when the user long-press the right encoder in the main menu.
Encoder event assignation
The left or right rotary encoder events apply 0.5dB gain steps to one or multiple inputs,
or one or multiple outputs. The user can choose any inputs or outputs, but cannot mix
inputs and outputs. They are assigned in the encoder assign menu:
SX-M2D2+ User Manual
24/37
