S
onneteer
Alabaster
Integrated amplifier
Instruction Manual
Page 1: ...Sonneteer Alabaster Integrated amplifier Instruction Manual ...
Page 2: ... Tp L1 and L2 should be used for line level signals e g Tape source Beware do not have the Tape Source selected when LnOut is connected to it whilst recording as this will result in a very nasty experience For best loudspeaker connection use bare wire through the threaded holes in the binding posts or spade connectors and be sure never to short positive and negative wires as this could have a detr...
Page 3: ...0 mVrms Bandwidth 8Hz to 80kHz THD 0 004 1kHz Full Power 0 005 10kHz Full Power Size mm 434 x 74 x 280 Fuse Values UK Europe Australasia 230V 240V T 3 15Amp USA Canada 110V 120V T 5 0 Amp Sonneteer reserves the right to change specifications without prior notice If a fault occurs please refer to your dealer Do not attempt to repair the unit yourself ...
Page 4: ...Sonneteer P O Box 163C Esher Surrey KT10 0YH England www sonneteer co uk ...
