Sonnen sonnenBatterie eco 7.0 Series, Operation And Installation Instructions Manual, Page: 96 / 115

11 Internet access
11.2.4 Using the graph page
The graph page shows all relevant energy flows in a graph.
The values displayed are subject to measuring instrument tolerances and rounding
errors. The only information that is relevant in terms of your energy bills is the
data taken from the utility company's meters.
Elements of the power graph
The power graph presents the different energy flows in relation to time.
1
►
Clicking on the day, week, month or year button defines the timeframe (4) shown in the
graph.
2 ►
Clicking on the magnifying glass activates or deactivate full-screen mode.
3 The power is shown in watts (W) on the y-axis.
The abbreviation ‘k’ stands for the prefix ‘kilo’. 3,0 k therefore corresponds to 3,0 kilowatts or
3000 watts.
4 Time is shown on the x-axis (in the above example, the timeframe shown on the x-axis is one
day).
5 This legend shows which energy flows are displayed in which colour in the graph (consumption is
shown in blue, for example).
►
Clicking on the desired energy flow (e.g. consumption) shows or hides this flow in the graph.
6 ►
Clicking on one of the buttons below the graph allows you to navigate to previous or later
timeframes.
7 ►
Clicking on the button provides the option of printingout the displayed graph.
8 ►
Clicking on the input field to the right of
goto allows you to select a date.
►
Clicking on the button > confirms the date selection.
9 ►
Positioning the mouse cursor over the graph shows the exact values for the energy flows at
this time.
►
By clicking and dragging, you can select a smaller timeframe in the graph.
Page 96 of 115 KD-262 | Part-No 52199 | EN | Version 1.00
3
4
5
6
2
3
5
6
7
8
1
9