Sonnen sonnenBatterie eco 7.0 Series, Operation And Installation Instructions Manual, Page: 92 / 115

10 Software
10.3.14 Installing software update
A software update takes a few minutes of time, during which time you cannot use
the storage system.
sonnen is constantly improving its products. So there may be a new software
version for your particular product. Read here how to install an update:
As soon as new software is available, you see the
i
button on the start page
►
Press
i
.
The information page opens.
►
Press
Install
Software-Update
.
The following window opens:
New software version available.
The most important changes in
comparison to the previous version are:
Update to version X.YZ
Here there are shown the most important
changes in comparison to the previous
software version.
In red colour there are shown important
informations and actions.
Start Update Cancel
►
Follow the instructions
►
Press „Start Update“
If the update is not to be installed:
►
Press „Cancel“.
After successful installation of the software update the storage system is
automatically restarted. You then see the following message:
Software update completed
The new version is X.YZ
Here are shown the most important
changes in comparison to the
previous version.
In red colour there are shown important
informations and actions.
Close
►
Follow any displayed instructions.
►
Press „Close“.
The update is now installed and the storage system – after a selftest – again fully
functional.
All settings made before the update are kept. The only exceptions are Child safety
and Lighting. These must be set again.
Page 92 of 115 KD-262 | Part-No 52199 | EN | Version 1.00