Sonnen sonnenBatterie eco 7.0 Series, Operation And Installation Instructions Manual, Page: 88 / 115

10 Software
10.3.10 Screen page Settings – BMS – General
Displays
Installed battery
capacity This is the maximum amount of energy in kWh that can be stored in the
battery.
Number of charged
cycles This shows the number of charge cycles since startup of the storage system.
A charge cycle is a combination of charging and discharging the battery.
During a charge cycle the complete useful capacity is charged in the storage
system and then discharged.
Example of a charge cycle:
The storage system has a charge status of 85% and is charged to 100 %.
During the night the battery is fully discharged (from 100 to 0 %). On the
next day it is again charged to 85 %.
Energy discharged
since full charge Here you see the amount of energy withdrawn in Wh since the last full
charge.
Page 88 of 115 KD-262 | Part-No 52199 | EN | Version 1.00