Sonnen sonnenBatterie 10, Installation Instructions Manual, Page: 30 / 100

5 | Installing the storage system
30 / 100 Installation instructions sonnenBatterie 10
5.4 Installing the power module
NOTICE
Danger due to touching live components on the power module
Damage to components of the power module due to electrostatic discharge
(
ESD )!
„
Do not remove the touch guard on the power module and do not open the
power module.
„
Do not touch any components under the touch guard on the power module.
„
Do not touch any components of the inverter by opening the power mod-
ule.
NOTICE
Danger due to lifting the power module by the touch guard
Damage to the power module!
„
Never lift the power module by the touch guard.
2.
1.
3.
„
Lift the power module by bringing the mounting handles on the right and left side of
the module into the openings and moving them up (1.).
„
Hang the power module in the middle on the top edge of the mounting frame (2.).
„
Secure the power module to the three drilled holes using the screws and contact discs
from the installation equipment pack (3.).
„
Tighten the screws with a torque of 6 Nm .
„
Hang the two mounting handles on the touch guard. The mounting handles remain in
the storage system.