background image

SONIX 8-BIT MCU OTP Easy-Writer 

SONiX TECHNOLOGY CO., LTD

                                             

                                                            V1.1

 

 
 
 
 
 
 
 
 
 
 

SONIX 8-BIT MCU OTP Easy 

Writer 

 
User’s Manual 

 

General Release Specification 

 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
SONIX reserves the right to make change without further notice to any products herein to improve reliability, function or design. SONIX does not 
assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent 
rights nor the rights of others. SONIX products are not designed, intended, or authorized for us as components in systems intended, for surgical 
implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SONIX product 
could create a situation where personal injury or death may occur. Should Buyer purchase or use SONIX products for any such unintended or 
unauthorized application. Buyer shall indemnify and hold SONIX and its officers, employees, subsidiaries, affiliates and distributors harmless against 
all claims, cost, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death 
associated with such unintended or unauthorized use even if such claim alleges that SONIX was negligent regarding the design or manufacture of 
the part. 

Summary of Contents for SN8P1600 Series



















































Reviews: