116
6 Failover Switchers - RB-FS82 & RB-FS82DC
Network Settings
Fig 6-10: The RB-FS82 Network Settings Screen
Host Name
The Host Name for this unit is used for Multicast DNS
Service Discovery. The default Host Name is the unit
Hardware Type, appended with the unique Serial Number.
IP Address
Please enter the static IP Address that you wish to assign to
this unit. The address must be in the correct form and the
default address is: 192.168.0.100
Netmask
Please enter the Netmask of the network you wish to
connect to. The default subnet mask is: 255.255.255.0
Gateway
Please enter the Gateway Address of your router. The
default gateway address is: 192.168.0.149
DHCP
Disable to prevent the unit from requesting a dynamic
address from a DHCP server.
Auto IP
Disable to prevent the unit from assigning itself an address
from the Auto IP range.
Note:
With both DHCP and Auto IP disabled the unit will use
the network settings entered above.
