43
Embedded Web Server
13
Audio - Input Settings Web Page
The Input Se�ngs page is located under the Audio sub tab and it shows the
configura�on of audio input 3 and the audio line up level.
Fig 13-17: Audio - Input Se�ngs Web Page
Audio Input 3 Function
– Analogue audio input 3 on the rear panel can be
configured as either a balanced stereo input or a balanced mono input and
output. In this mode, the mono output is routed to the right channel of the
connector.
Audio Line Up
– The input audio line up applies to the balanced stereo line
input 3 or balanced mono input when audio input func�on is set to mono
input/output. It sets the analogue audio level that corresponds to full scale
digits when converted to digital audio. It is recommended to use a similar
value on all equipment that offers variable input line up.
Audio - Input Settings Defaults
Audio Input 3 Func�on:
Stereo Input
Audio Line Up:
+18dBu = 0dBFS
Audio - Output Settings Web Page
The Output Se�ngs page is located under the Audio sub tab and it shows
the current source and state of the 3 analogue audio outputs. The output
audio line level is also set here.
Fig 13-18: Audio - Output Se�ngs Web Page
Audio Output Select
– This drop down list selects the audio output to view
and change se�ngs.
Source
– This op�on selects the audio source for the selected output. This
can be any of the local audio inputs including the microphone, or an AoIP
stream.
