29
Embedded Web Server
13
Configuration Tab
The pages under the Configura�on tab are split into groups and all of the
unit’s configura�on se�ngs can be edited here. Each page has a SUBMIT
bu�on that sends the changes to the connected unit. The SUBMIT bu�on
remains disabled un�l changes have been made on the page. Once the
SUBMIT bu�on has been pressed, a busy indicator will be shown and the
page will be temporarily disabled un�l the changes have been wri�en.
Network Web Page
The Network page shows the current configura�on of the Ethernet and
AoIP network ports. The intercom name is also set here.
Intercom Name
– The intercom name is the user friendly name that
iden�fies the unit on the network. It is a good idea to assign a user name or
loca�on as this is easily recognised by other users. The default intercom
name is made from the device ID and the 7 digit product serial number i.e.
AVN-TB20AR-1234567. The intercom name can only contain le�ers,
numbers and hyphens although it cannot start or end with a hyphen.
Address Mode
– Each network port has its own independent address mode
which determines how the port obtains its IP address. When set to
dynamic, the unit will a�empt to acquire an IP address automa�cally from
either a DHCP server or via auto configura�on if no DHCP server is found.
The actual IP address will be shown on the device informa�on page. When
sta�c mode is used, the IP address and subnet mask values entered will be
assigned to the corresponding network port.
Static IP Address
– This is the IP address that will be assigned to the
corresponding network port when sta�c address mode is selected. It is
important to ensure that this IP address is not currently in use on the
network. These values are not used when the address mode is dynamic.
Static Subnet Mask
– This is the subnet mask that will be used for the
corresponding network port when sta�c address mode is selected. These
values are not used when the address mode is dynamic.
Fig 13-6: Network Web Page
