37
Embedded Web Server
6
Information
This information shows the current status of the unit as well as the
software versions of the various modules running on the unit. When
contacting Sonifex technical support, it is important to provide the
information shown on this page.
The lower half of the page shows the configuration of the network ports;
the ‘Control Port Information’ shows the network address configuration of
the embedded web server which can be accessed on both the ‘Primary’ and
‘Secondary’ Ethernet connections.
The ‘Primary Dante Port Information’ and the ‘Secondary Dante Port
Information’ shows the configuration information of each port to the Dante
audio network. The network settings of these two ports can be controlled
via the Dante controller application or via the ‘network’ configuration web
page. If the Dante redundancy setting for the unit is set to “Switched” via
Dante controller then only the Control Port and Primary Dante Port
Information are shown here.
Fig 6-2: Device information
Fig 6-3: Port information
