1
Introduction
1
Safety & Installation
1
1. Introduction
The mul�-channel Dante® audio interfaces convert balanced analogue or
AES audio inputs and outputs to Dante AoIP. Simple to configure and
operate, these cost-effec�ve rack-mount solu�ons offer an easy solu�on for
AV professionals and system integrators.
• AVN-AIO4 provides 4 analogue audio inputs and 4 analogue audio
outputs on Neutrik XLR connectors.
• AVN-AIO8 and AVN-AIO8R provide 8 analogue audio inputs and 8
analogue audio outputs on Neutrik XLR connectors.
• AVN-AI16 and AVN-AI16R provide 16 analogue audio inputs on Neutrik
XLR connectors.
• AVN-AO16 and AVN-AO16R provide 16 analogue audio outputs on
Neutrik XLR connectors.
• AVN-AESIO8 and AVN-AESIO8R provide 8 digital AES inputs (16 channels)
and 8 digital AES outputs (16 channels) on Neutrik XLR connectors.
• Dante network connec�on for configura�on using Dante Controller.
• AES67 opera�on.
• Dante Domain Manager compliant.
• 1U 19” rack-mount form factor.
• Powered by PoE.
• Adjustable global 0dBFS line up (+12dBu/+18dBu/+24dBu = 0dBFS).
(All models except AVN-AESIO8 & AVN-AESIO8R).
• Sample rate conversion on AES inputs to Dante system sampling rate
(AVN-AESIO8 & AVN-AESIO8R only).
The Dante sample rate can be configured between the following op�ons
via Dante Controller:
• 44.1kHz
• 48kHz
• 88.2kHz
• 96kHz
• 176.4kHz (Not Available On AVN-AIO4)
• 192kHz (Not Available On AVN-AIO4)
On the AVN-AIO4 when the sample rate is configured to be greater than
48kHz, only the first two inputs and outputs can be used.
Note: For the AVN-AIO4, for sample rates >48kHz, the unit can be
configured as a 4 input OR 4 output device by loading different firmware,
e.g. if you wanted to use 96kHz as the Dante sample rate and have 4
inputs or 4 outputs on the AVN-AIO4.
Contact [email protected] if you require this feature.
